If the bat jumps, drifts or disappears in iB Cricket on Quest 3, stop swinging before trying to fix it. First work out whether the problem is the controller, the headset’s view of the room, or the bat’s position inside the game. They need different checks.
Start with the checks below and change one thing at a time. There is no need to redraw your boundary after every missed shot, and a new bat is not a guaranteed tracking fix.
1. Check where the fault happens
- The controller also jumps in the Quest menus: start with lighting, camera visibility, accessories and batteries. That points beyond iB Cricket alone.
- The whole view or floor seems to move: stop play and check the headset’s tracking, surroundings and floor level before continuing.
- The controller is steady but the virtual bat sits at the wrong angle: check your selected bat setup and the in-game calibration. A fixed offset is different from tracking that drops out.
- The fault appears only with a bat attachment: test with the bare controller, held normally, in a safe clear space. This helps separate the accessory setup from the headset or game.
2. Give the headset a clear view
Meta’s controller-tracking checklist recommends a well-lit room without direct sunlight, small decorative lights or reflective surfaces that can interfere with tracking. Check for mirrors, glass and LED strips near the play area. Keep the tracking cameras clean, following Meta’s care instructions, and avoid obstructions between the headset and controller.
Quest 3’s Touch Plus controllers do not have the tracking rings found on older Quest controllers. Meta explains that Touch Plus tracking relies on the controllers being held in-hand and visible to the headset’s cameras. Instructions about keeping a Quest 3 “tracking ring” uncovered are therefore the wrong advice.
3. Test the controller without extra accessories
Remove covers, sleeves or attachments for a comparison test. Meta warns that third-party accessories can cause tracking problems, particularly when they move the controller away from your hand. If the bare controller behaves normally, check the attachment’s compatibility, mounting instructions and security before using it again. Do not carry on swinging with a loose mount.
For the VR cricket bat for Meta Quest 3 and 3S, the site’s bat guide covers the equipment context. Treat the bare-controller test as a diagnostic step, not a reason to buy another accessory.
4. Check the battery, then restart
- Check the controller battery level and replace a depleted AA battery. Follow the battery instructions for your controller; do not try to charge a disposable battery.
- Meta recommends removing removable controller batteries for at least 30 seconds before reinstalling them when troubleshooting tracking.
- Power off and restart the headset, then test again before reopening iB Cricket.
- If the controller still misbehaves outside the game, follow Meta’s Touch Plus instructions to unpair and re-pair it using the Meta Horizon phone app.
5. Check boundary and bat calibration separately
The boundary marks your physical safe play area. It is not the same as the game’s bat calibration. Redraw it if it no longer matches your cleared room, or correct the floor level if it is wrong. Meta’s current route is Quick controls → Settings → Environment setup → Boundary → Create new boundary; menu wording can change with software updates. See Meta’s boundary guide.
Clearing Boundary History is not a general tracking reset: Meta says it does not clear scenes, tracking or maps. Do not repeatedly erase it as a substitute for checking the actual fault.
Once the controller is stable, reopen iB Cricket and check the bat/controller configuration and calibration available in the game. Check again after changing how the controller is mounted. Changing virtual stadium does not, by itself, require a different physical boundary.
Keep a safe buffer around your cleared area and check overhead hazards. Never disable the boundary or draw through furniture to make room for a shot. Meta’s safety warnings explain that a boundary cannot physically stop a collision and may not warn quickly enough during fast movement. The VR cricket space guide covers room planning.
6. Still happening? Record the pattern
Check for available Quest system and iB Cricket updates. If the fault remains, note whether it affects one or both controllers, happens in other apps, and changes when accessories are removed. Include your headset model, game version and the steps you have tried when contacting support.
Use Meta support for controller or headset faults across apps. For an iB Cricket-only issue, use the support contact on the official iB Cricket website. A factory reset is not the first step in this guide; get support advice before taking a step that removes local settings and data.
3 thoughts on “How to Fix Tracking Issues in iB Cricket on Quest 3”